Stainless Steel screws ¾” #6 Phillips provided.
If measurements are outside or over the window:
Allow 1” – 1 ½” (2.4-4cm) past the window at each side for light control.
Measure top, bottom, left side, right side. We will not make any deductions.
Please indicate finished size when ordering.
If the window is tapered, indicate taper as left or right (looking out).
Shade roller must be at 90 degrees from one vertical side of window.
If window is wider at top; the shade will be Top-Down.
If window is wider at bottom; the shade will be Bottom-Up.